Description
Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
Print Speed (batch mode):** • 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour
(YMCK with transfer and dual-sided, simultaneous lamination)*
• 55 seconds per card / 65 cards per hour
(YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted Standard Card Sizes: CR-80 (3.370˝ L x 2.125˝ W / 85.6 mm L x 54 mm W)
Accepted Card Thickness: .030˝ (30 mil) to .050˝ (50 mil) / .762 mm to 1.27 mm
Input Card Cartridge Capacity: 100 cards (.030˝ / .762 mm)
Output Hopper Card Capacity: 200 cards (.030˝ / .762 mm)
Software Drivers: Windows® XP / Server 2003 / Vista (32 & 64 bit) / Server 2008 (32 & 64 bit) /
7 (32 & 64 bit); Mac OS X v10.4 / v10.5; and Linux***
Print Area: Over-the-edge on CR-80 cards
Warranty: • Printer – Two years including one year of free printer loaner support (the U.S. only);
optional Extended Warranty Program (the U.S. only)
• Printhead – Lifetime; unlimited pass
Options: • Card lamination module – single-sided
or dual-sided (simultaneous)
• Smart card encoding (contact/contactless)
• Dual-sided printing
• Door and cartridge locks
• Printer cleaning kit
• Magnetic stripe encoding
• iCLASS® Programming Platform Kit
• Secure Proprietary Consumables
System
• Custom Secure Holographic HDP Film
and OverlaminatePrint Method: HDP Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
Print Ribbon Options:
• Full-color, YMC*, 750 prints
• Full-color with resin black, YMCK*, 500 prints
• Full-color with two resin black panels, YMCKK*, 500 prints,
• Full-color with resin black and heat seal panel for difficult-to-print surfaces,
YMCKH*, 500 prints
• Full-color with resin black and inhibit panel for signature or
other non-printing areas, YMCKI*, 500 prints
• Full-color with fluorescing and resin black, YMCFK*,
500 prints
• Resin black, K, 3000 prints
HDP Film Options: • Clear (1,500 prints) • Standard Holographic (500 prints) • Custom Holographic, special order (500 prints)
Overlaminate Options:
• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil, and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)
All overlaminates available in clear, standard holographic design or custom holographic design
Print Speed:**
Batch Mode:
• 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• 55 seconds per card / 65 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted Standard Card Sizes: CR-80 (3.370”L x 2.125”W / 85.6mmL x 54mmW)
Print Area: Over-the-edge on CR-80 cards
Accepted Card Thickness: • Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
• Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
Accepted Card Types: ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards
Note: ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module.***
Input Card Cartridge Capacity: 100 cards (.030” / .762mm)
Output Hopper Card Capacity: 200 cards (.030” / .762mm)
Card Cleaning: Replaceable cleaning roller (included with each print ribbon)
Memory: 16MB RAM
Display: User-friendly, SmartScreen™ LCD Control Panel
Software Drivers: Windows® 2000 / XP / Server 2003 / Vista (32 & 64 bit) / 7 (32 & 64 bit); Mac OS X v10.4 / v10.5; and Linux****
Single Wire USB 2.0
Encoding Options:
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1)
• as well as synchronous cards
• Prox Card Reader (HID read-only) • iCLASS® Programming Platform Kit
Interface: USB 2.0 (high speed) and Ethernet with internal print server
System Requirements: • x86-based PC or compatible, Windows 2000, Windows XP, Windows 2003, or Windows Vista, 500MHz computer with 256MB of RAM
• or higher, 500MB free hard disk space or higher
Operating Temperature: 65° to 90° F / 18° to 32° C
Supply Voltage: 100-240 VAC, 3.3 A
Humidity: 20 – 80% non-condensing
Dimensions:
• HDP5000: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
• HDP5000 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
• HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
• HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
• Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD
Weight: • HDP5000: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg, HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg,
• HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg
Agency Listings:
• Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
• EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,EN 61000-3-2: 1995, EN 55024: 1998,
• CE mark, and CCC mark
Supply Voltage: 100-240 VAC, 3.8A
Supply Frequency: 50 Hz / 60 Hz
Warranty: • Printer – Two years including one year of free printer loaner support (the U.S. only); optional Extended Warranty Program (the U.S. only),
• Printhead – Lifetime; unlimited pass
FARGO Secure Materials:
FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life, and printer/encoder reliability, use only FARGO Secure Materials.
FARGO warranties are void, where not prohibited by law when non-FARGO Secure Materials are used.
Options:
• Card Lamination Module – single-sided or dual-sided (simultaneous)*** • Magnetic stripe encoding • 200-card input hopper
• Smart card encoding (contact/contactless) • Dual-sided printing • Door and cartridge locks • Printer cleaning kit
• Secure Proprietary Consumables System • Custom Secure Holographic HDP Film and Overlaminate
Software: FARGO Workbench Diagnostic Utility
Reviews
There are no reviews yet.